At present, the material of most radiators has been changed to aluminum profiles, so what is the pre-treatment of industrial aluminum profiles in aluminum profiles? Today, let me briefly introduce the pre-treatment mechanism of aluminum profile radiators, hoping to be helpful to everyone.

Some specific methods for pre-treatment of industrial aluminum profiles are as follows: 1 Organic solvent degreasing. Organic solvents are required before processing aluminum profile radiators. Industrial aluminum profiles have the characteristics of being slightly shorter in soaking time for those with less oil stains. For those with more oil stains, cotton cloth should be soaked in some solvents before wiping the surface, or some tools should be used to clean the aluminum profile. When using organic solvents, it is necessary to pay attention to operational safety and place them in a cool and dry place when not in use.

2. After cleaning, it should be air dried, otherwise it will leave water marks on the surface and lose its cleaning effect.

3. After the processing is completed, the aluminum profile needs to be bundled. Now, aluminum wire is used, and it is important to note that copper wire and iron wire with zinc added cannot be used. If only pure iron wire is used, it can be used. The position of the binding is also crucial, and it is necessary to greatly reduce the impact on the surface. Only in this way can the quality of industrial aluminum materials and aluminum profiles produced be guaranteed

4. Clean the aluminum profile with an alkaline solution.

5. First, use hot water for cleaning, and then repeatedly rinse the remaining solution on those parts.