From the theoretical knowledge of industrial aluminum profile extrusion molds, we can see that industrial aluminum profile extrusion molds.

Theoretical knowledge refers to: formulas for calculating the extrusion ratio and strength verification of aluminum profile extrusion split dies, etc;

Empirical knowledge refers to: for example, the bridge width value is 20-30, the welding chamber depth value is 15-45 (generally for small machines such as 800-1000T, the value is 15), for example, the welding chamber of a 10000T extrusion machine can reach 45 or even 50, and so on;

Normative knowledge refers to: such as the external diameter of the mold, the thickness of the upper and lower molds, etc;

Inspirational knowledge refers to the selection of a set of empirical parameters for trial design, based on a previously designed, qualified mold mature design scheme similar to the current design, and gradually adjusting each parameter to obtain a reasonable design scheme.

The design of aluminum profile pressing molds is often based on experience accumulation. There is currently no complete and systematic feasible design theory available. The following applies inspirational knowledge to illustrate the importance of experience in the design process of industrial aluminum profiles.

For a parameter that needs to be determined during the design process, if there is no direct calculation formula and only a verification formula, it is only the main factor that affects the range of parameter values. People record the empirical values and conditions of this parameter in the previous design, and when similar situations are encountered again, the value of the parameter can serve as inspiration and guidance. For example, when determining process parameters, the number of die holes, extruder tonnage, extrusion diameter, extrusion ratio, and ingot size of a certain cross-section design are mutually influencing and interrelated parameters. In actual production, there is no independent calculation formula for a certain parameter, and often a group of parameters are selected based on experience and determined through exploratory methods.

(Some of the materials on this website come from the internet. If the information displayed on this website infringes on the intellectual property or other legitimate rights of the media or individuals, please notify us in a timely manner and we will immediately delete it.)